My new Matryoshka project!
I've been working on this on and off for a while and finally sat down and actually finished it! I have tons of scrap wood in the garage and I have been thinking about trying a wood burning design for a while. Since I'm going crazy with Matryoshka dolls right now...why not!First thing's first, decide on a design...
There are so many options for these dolls, it was really hard to pick how I wanted this to look. In the end, the simplest design to burn won. I'm not a wood burning master, so I figured why make it harder than it's already going to be.
Transfer your design...
After I decided on the design I cut it out and then traced with pencil on the back. I flipped it over and traced again, transferring the pencil mark to the wood.
Before I started to burn the wood, I used the wood burner tip(not turned on) to score my pencil marks. Since my wood was so bumpy, this made it easier to stay in the lines and gave me less opportunity to mess up when the wood burner was on.
Burn the design...
Turn on your wood burner and go for it! I've used mine a few times for other projects, but if you haven't used a one before, practice on some scrap wood first. This way you can get a feel for how fast to move and the pressure to use.
My original plan was to just burn the design and stain the wood, but then I wondered what would happen if I put some watercolor on there. It gave it color without covering the wood grain, which I love.
Seal with polyurethane...
When I was done I added one coat of matte polyurethane to protect the watercolor. I'm thinking I'm going to add a hook on the back so I can put this up on the wall.
Thanks for visiting!
See my project gallery for more projects I've been working on
Thank you so much for visiting my blog!
Project Gallery
Project Gallery
I will be sharing with these great blogs!
Follow me here: